How to Completely Reset Your Onforu Security Camera

If you need to restore your Onforu Security Camera to its factory settings, either to pass it on to someone else or for troubleshooting purposes, follow the instructions below.

If you are transferring ownership of the device, don’t forget to remove it from the Onforu app after the reset (you can find the removal process at the bottom of this page).

Performing a factory reset will delete all stored settings, including your Wi-Fi password. After the reset, you’ll need to set up the camera as if it were new. If you are resetting the camera for troubleshooting, click here for guidance on reconnecting your Security Camera to your Wi-Fi network.

Steps to Reset Your Onforu Floodlight Camera

1. Locate the setup button on the underside of the camera.   
2. Press and hold the reset button for 5-10 seconds until you hear a "Ding" or "Dong Dong Dong" sound.   
3. Wait 15-20 seconds for the camera to announce "Camera Start" or emit two notification sounds "ding ding ding, ding ding ding", followed by a "di, di" sound after 2 seconds, indicating it is ready to scan for available networks for setup.   

Removing Your Security Camera from Your Onforu Account and App

After resetting your camera, remember to remove it from the Onforu app if you are giving it away.

1. Here’s how to do it:
2. Tap "…"
3. Select Device Management.
4. Choose the device you wish to remove.
5. Tap Remove Device.

Important: If you skip this step, the new owner will be unable to set up the device.

→ Back To Floodlight Camera Support.