How to Install & Maintain Home Security Light?

How to Install & Maintain Home Security Light

Using outdoor lighting not only improves safety but also brings more convenience to your home's daily life. Installing outdoor home security lights or floodlights is a great way to enhance your home's safety and security at night. If you haven't installed outdoor security lights or are wondering how to install them, this article will give you more help.

Best Practice for installing security lights

1. Choose the right location for installation

If you are replacing an old fixture, then the location of the fixture installation has already been determined for you. This is convenient, want the most effective lighting, and security light installation position at least 9 feet in the vertical position.

If you are installing outdoor security lights for the first time, then you have to consider the ideal location. Examples include house patios, front doors, garages, or doorways that are dark at night. These are all places that need light.

Once you have chosen a location, the next step is to mark it well. You have to make sure that the wires need to meet the specifications for use.

2. Turn off the power

Safety is always the first priority. Before you start any electrical work, you must turn off the power to the breaker box to prevent injury. Then test the circuit to ensure that no power is coming through before proceeding.

*See step 3 - 4 if you are replacing a new fixture, or step 5 - 7 if you are directly securing a new fixture.

3. Remove existing light fixtures

First, unscrew the fixture from the wall plate. Then gently pull everything away from the wall. Use a voltage tester to check for exposed wiring before touching.

4. Wire and install the replacement outdoor security lights

Connect the mounting tape of the new fixture to the fixed position of the old fixture. You can match the wires of the new fixture to the existing wiring according to color: white to white, black to black.

Also, connect the wires using wire connectors and electrical tape. And use a screwdriver to screw the light to the mounting strip.

Finally, turn the power back on and test the light.

5. Install the outdoor security light in the new area

Use a drill bit to drill holes on the exterior of the location where the fixture has been marked for installation. Place a junction box near the mounting area and connect the cable through the box. 

6. Seal the junction box

Use silicone caulk to seal around the perimeter where the wall plate meets the wall. And smooth out the bead with a trimming tool or fingertip. Wipe off excess caulk with a damp cloth. Allow the caulk to dry completely.

7. Turn the power back on for testing

After making all the above connections, turn the power back on at the circuit box and turn on the new light. Does it glow in the correct direction? If they are installed correctly and working properly, the installation needs to be carefully checked for problems such as crossed or loose connections.

Once you have determined that your outdoor wall sconce is working properly, consider adjusting the optimal angle of the lighting to provide maximum illumination where you want it to be to take full advantage of it.

Outdoor lighting is a great safety and security for the exterior of any home. Installing outdoor floodlights is also a fairly simple task, but take all the necessary safety precautions to protect yourself from electrical currents.

Best Practices to maintain outdoor security lights

1. Clean the surface before installation

There should be no dust or debris on the surface of the wall before the LED security light is affixed to the installation process to ensure that the LED light unit is firmly bonded to the wall. If the mounting surface is rough, it can be sandpapered first and the polished surface can be cleaned with external alcohol.

2. Regular dust removal

LED security lights installed outdoors are not immune to dust. Users can regularly wipe the surface of the wall lamp with a soft dry microfiber cloth to avoid dust sticking to the surface of the lighting equipment for a long time, it is difficult to remove.

3. Avoid humidity or high temperature

The environment in which the light is installed is a very important factor affecting the life of LED lights. High and low temperatures or air humidity can affect the working time of the lamp because it affects the internal electronic components, for example, moisture can cause the LED components to break or rust. Users should use a paper towel or soft cloth to dry the area in contact with moisture and avoid prolonged exposure to moisture.

4. Power outlet connection

Periodically check the power connection for loose, poor contact with the LED, etc. will affect its life. If the LED blinks or does not light up, make sure that the device plug and power connector are securely fastened.

5. Remove any residue and debris

Periodically check the surface of the device for stains or splashes. If it is in a dry state, apply a warm, damp cloth to gently wipe the affected area. A small amount of topical alcohol can also be applied to the LED device before wiping it with a paper towel.

6. Avoid using caustic cleaners

Harsh chemical cleaners should not be used on any LED products. This is because this part of the device contains adhesives that can lead to corrosion or even failure over time.

No matter what electrical equipment is used, it requires regular care and maintenance. This is especially true for lighting that is exposed to the outdoors year-round. Many outdoor locations are equipped with LED lighting, which often illuminates dark areas and can improve safety and visibility.

Regular inspection and maintenance of any outdoor lighting equipment can extend the life of LED lights and ensure the safety they provide, as well as provide significant savings.

More Resources:

Video Resources:


Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.